3rd GENERATION SC-HSP8 FULLY SERVO BLOWING MACHINE
The 3rd generation SC-HSP8 blowing machine is a new technology with a production capacity of up to 16,000 BPH. It minimizes material waste and offers full control of machine temperature, water pressure, and air pressure through a PLC touchscreen. This fully automatic servo motor bottle blow molding machine can produce PET containers for a variety of drinks, soybean, vinegar, pesticide shapes, and diameters with high efficiency.
The machine has an automobile system and utilizes distant infrared ray heat pipes. It features high-pressure protection and precisely removes molds. The equipment is easy to maintain and includes components from famous companies such as Mitsubishi, Schneider, Airtac, Siemens, and Festo, among others.
设备参数Equipment parameters:
|
组 成 Part |
项 目 Project |
技 术 参 数 Technical Parameters |
|
制品条件 Product conditions |
制品最大容积The max. volume of the product |
1500ML |
|
制品最大直径The max. diameter of the product |
Φ110 |
|
|
制品瓶口尺寸Product bottle neck size |
30 mm |
|
|
制品最大高度The max. height of product |
<320mm |
|
|
适合胚管最大高度The max. height of preform |
<125mm |
|
|
瓶胚间距Preform spacing |
38 mm |
|
|
瓶子间距bottle spacing |
120mm |
|
|
模具标准厚度Mold Standard Thickness |
200mm |
|
|
产量（瓶/小时）Output (bottle/hour)13G |
14000-16000 500ml）/水瓶 bottle |
|
|
模具腔数Mold cavity |
8 |
|
|
加温部分 Heating Part |
加温单元Heating unit |
6 |
|
加温灯层数Layers of heating lamp |
10 |
|
|
胚管座数（个）Number of germ tube seats (pieces) |
208 |
|
|
电气参数 Electrical parameters |
电压Voltage |
220/380V |
|
频率Frequency |
50/60Hz |
|
|
使用功率use power |
45kw/h |
|
|
装机功率Installed power |
180 kw |
|
|
气源Gas source (高压耗气量视PET瓶容积而定The high-pressure air consumption depends on the volume of the PET bottle) |
高压压缩空气压力high pressure compressed air |
25-30bar |
|
高压压缩空气耗气量 High pressure compressed air consumption |
10.0 m3/min |
|
|
冷却水（水温≤12℃） Cooling water (water temperature ≤12°C) |
压力Pressure |
3bar |
|
流量Flow |
5m3/h |
|
|
重量 Weight |
主机\加温机\电控箱等 Blower \ heating machine \ electric control box, etc. |
7.5 |
|
设备外形尺寸 Dimension |
主机(L×W×H)Machine(L×W×H) |
7500*1900*2300mm |
|
理胚机(L×W×H)Preform feeder(L×W×H) |
2100*1350*2700mm |